Ukudutyulwa kweNtsimbi eNgatyiwayo
Imodeli/ubungakanani:0.2-2.5mm
Iinkcukacha zeMveliso:
I-Forged stainless shot shot yenziwe nge-SUS200, 300, 400 series wire steel stainless wire kunye nomhlaba ube ziibhola ezingqukuva ezahlukeneyo. ukuphosa okumibalabala kunye neemveliso ezifuna umgangatho ophezulu womphezulu.ubukhulu obususela kwi-0.20mm ukuya kwi-2.50mm.
IiNgcaciso eziphambili:
| IPROJEKTHI | INGCACISO | INDLELA YOVAVANYO | |||
| UHLELO LWEKHEMICAL |
| ≤0.8% | P | 0.045% | ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 |
| Si | 1.00% | Cr | 18.0-20.0% | ||
| Mn | ≤2.0% | Ni | 8.0-10.0% | ||
| S | 0.030% | Mo | / | ||
| IMICROTRUCTURE | Deforned Austenite | GB/T 19816.5-2005 | |||
| Ukuxinana | 7.8g/cm³ | GB/T 19816.4-2005 | |||
| NGAPHANDLE | Umphezulu omenyezelayo ongena mhlwa, ubume bentsimbi engqukuva | Okubonakalayo | |||
| UBUNZIMA | HV:240-600(HRC20.3-55.2) | GB/T 19816.3-2005 | |||
Ekrwada Izinto eziphathekayo:
Imeko yoqoqosho yokusebenzisa ucingo olusikiweyo olungenasiphene ekuchameni nasekuqhumeni imisebenzi yokucoca kulula kakhulu ukwenza.Ucingo olusikiweyo aluqhekeki okanye luqhekeke ngexesha lokusetyenziswa kuba luluqilima.Ngenxa yoko, ufumana ezi zibonelelo:
①Intsimbi engenastainless cut wire shot inobomi obude kakhulu kunokudubula kwentsimbi okanye igrit kunye nekhabhoni cut wire shot.
②Ukuveliswa kothuli kusezantsi kakhulu - imisebenzi yokuqhushumba icoceke ngakumbi
③Intsimbi engenastainless cut cut shot ivelisa iziphumo ezigqwesileyo ngenxa yokufana kunye nokomelela kwayo
④Iya kukwenza umbutho "oluhlaza" kuba ukulahlwa kwemithombo yeendaba echithiweyo kuya kuncitshiswa kakhulu.(Awuyi kufuna ukudubula okuninzi, iimfuno ze-inventri ziya kuba sezantsi, kwaye imithwalo engaphakathi iya kubiza ngaphantsi.)
⑤ AWUYI kwazisa ungcoliseko lwe-ferrous kwi-non-ferrous castings okanye izinto zokusebenza njengoko kwenzeka ngokusetyenziswa kwentsimbi okanye i-carbon cut wire shot.
Usetyenziso:
300 series Stainless steel shot ukuqhushumba lusebenza kakhulu unyango umphezulu zokuphoswa kwe-aluminiyam, kunye noomatshini abachanekileyo, ngakumbi i-turbocharger.
200 kunye 400 uthotho Stainless steel shot ukulungiselela i-aluminiyam yokususwa kwepeyinti kunye ne-aluminiyam yokulahla i-deflashing kunye nokugqiba.
