Igrithi yentsimbi yeCarbon ephezulu yeAngular
Imodeli/ubungakanani:I-G12-G150 Φ0.1mm-2.8mm
Iinkcukacha zeMveliso:
Igrit yentsimbi yekhabhoni ephezulu ye-angular yenziwe kwikhabhoni ephezulu yokudutyulwa kwentsimbi.Izithonga zentsimbi ezityunyuziweyo zibe yigranular grit form kwaye emva koko zithotywe zibe ziinzima ezintathu ezahlukeneyo (GH, GL kunye neGP) ukulungiselela izicelo ezahlukeneyo.Igrit yentsimbi ephezulu yekhabhoni isetyenziswa ngokubanzi njengemithombo yeendaba ekwehliseni amacandelo entsimbi phambi kokwaleka.
IiNgcaciso eziphambili:
| IPROJEKTHI | INGCACISO | INDLELA YOVAVANYO | |||
| UHLELO LWEKHEMICAL |
| 0.8-1.2% | P | ≤0.05% | ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 |
| Si | ≥0.4% | Cr | / | ||
| Mn | 0.35-1.2% | Mo | / | ||
| S | ≤0.05% | Ni | / | ||
| IMICROTRUCTURE | I-Homogeneous Martensite okanye i-Bainite | GB/T 19816.5-2005 | |||
| Ukuxinana | ≥7.0-10³kg/m³(7.0kg/dm³） | GB/T 19816.4-2005 | |||
| NGAPHANDLE | Iprofayile yomphezulu echongiweyo okanye i-angular, Umngxuma womoya < 10%. | Okubonakalayo | |||
| UBUNZIMA | I-HV:390-720(HRC39.8-64) | GB/T 19816.3-2005 | |||
Amanyathelo Okulungisa:
Usetyenziso:
High Carbon Steel Grit GP:Inobunzima obusezantsi kuluhlu lwama-40 ukuya kuma-50 HRC kwaye ikwahlonitshwa njengokudubula kwe-angular, kuba igrit iya kufumana ukumila okungqukuva ngexesha lokuphila kwayo.Isetyenziswa ikakhulu kumatshini wokuqhushumba kwamavili kwaye ineziphumo ezilungileyo kwishishini le-Foundry kuba licoca ngokukhawuleza kunye nokunyuka okuncinci kweendleko zokugcina kunye neengxenye zomatshini ukunxiba.I-GP isetyenziselwa ukucoca, ukuthoba kunye nokususa isanding.
High Carbon Steel Grit GL:Inobulukhuni obuphakathi kuluhlu lwama-50 ukuya kuma-60 HRC.Isetyenziswa koomatshini bokuqhunyiswa kwamavili kunye namagumbi okuqhushumba kwaye ifaneleke ngakumbi ukwehla okunzima kunye neemfuno zokulungiselela umphezulu.Nangona i-GL ibubulukhuni obuphakathi, ikwaphulukana nokumila kwayo okwe-angular ngexesha lokudutyulwa.
High Carbon Steel Grit GH:Ubunzima obukhulu obuvela kwi-60 ukuya kwi-64 HRC.Ihlala i-angular kumxube wokusebenza kwaye ke ngoko ifaneleke ngokufanelekileyo kwiimfuno zokutsala umphezulu.I-GH idla ngokusetyenziswa kumagumbi okuqhushumba (izixhobo zokukroba umoya ocinezelweyo.) Ukucoca ngokukhawuleza kunye nokufezekisa iphrofayili ye-anchor ngaphambi kokugquma.
